Three coordinate measuring machine run normally requires operator attention, but also pay attention to the usual three coordinate measuring machine maintenance work to do.
1. Please move lower the Z axis, but should avoid sharp hitting the workbench;
2. Clean workbench surface after work;
3. Check the guide rail. If there is watermark, please check filters. If there is any scratch or dent, please do not hesitate to contact our company, avoid to cause greater loss;
4. Close the total air after work;
5. Please do not edit, modify, or delete the program parameter under the installation directory to avoid using the machine in wrong way lead to unnecessary problems.
Three coordinate measuring machine that can run normally not only require operator attention but also pay attention to the usual three coordinate measuring machine maintenance.
Please inform us if any questions or advice